Dlhá 1, 900 31 Stupava
Production of motor oils and lubricants
Production of special lubricant
Production of lubricants
Work on the production of lubricants
Lubricant testing
Production technology for Lubex® universal and special lubricants.

Production and distribution of standard and special lubricants, raw materials for lubricants and fuel additives

We offer you an extensive range of automotive and industrial lubricants, cutting oils, compressor oils, heat transfer and forming oils and fuel additives.
In addition to these products, we also have other products available as per your requirements.
We offer complete care and advice and also free technical service for the application of our products.

Product offer

LUBEX® CGLP 32

Oil is made from appropriately selected refined mineral base oils and additives. Special friction modifiers provide optimal ratio of static and dynamic friction, which excludes "stick - slip" phenomenon.

Typical use

For lubricating slideways and and combined lubrication systems: hydraulics - slide surfaces of machining tools.

Parameters

Kinematic viscosity at 40°C, mm2/s
32

Flash point, °C
210

Pour point, °C
-21

Specifications / Approvals / Norms
ISO 6743-4 L-HG, L-G, Cincinnati norms, P-53, P-47, P-50, DIN 51 502-CGLP, DIN 51 524-2

LUBEX® CGLP 46

Oil is made from appropriately selected refined mineral base oils and additives. Special friction modifiers provide optimal ratio of static and dynamic friction, which excludes "stick - slip" phenomenon.

Typical use

For lubricating slideways and and combined lubrication systems: hydraulics - slide surfaces of machining tools.

Parameters

Kinematic viscosity at 40°C, mm2/s
46

Flash point, °C
220

Pour point, °C
-21

Specifications / Approvals / Norms
ISO 6743-4 L-HG, L-G, Cincinnati norms, P-53, P-47, P-50, DIN 51 502-CGLP, DIN 51 524-2

LUBEX® CGLP 68

Oil is made from appropriately selected refined mineral base oils and additives. Special friction modifiers provide optimal ratio of static and dynamic friction, which excludes "stick - slip" phenomenon.

Typical use

For lubricating slideways and and combined lubrication systems: hydraulics - slide surfaces of machining tools.

Parameters

Kinematic viscosity at 40°C, mm2/s
68

Flash point, °C
220

Pour point, °C
-21

Specifications / Approvals / Norms
ISO 6743-4 L-HG, L-G, Cincinnati norms, P-53, P-47, P-50, DIN 51 502-CGLP, DIN 51 524-2

LUBEX® CGLP 100

Oil is made from appropriately selected refined mineral base oils and additives. Special friction modifiers provide optimal ratio of static and dynamic friction, which excludes "stick - slip" phenomenon.

Typical use

For lubricating slideways and and combined lubrication systems: hydraulics - slide surfaces of machining tools.

Parameters

Kinematic viscosity at 40°C, mm2/s
100

Flash point, °C
220

Pour point, °C
-18

Specifications / Approvals / Norms
ISO 6743-4 L-HG, L-G, Cincinnati norms, P-53, P-47, P-50, DIN 51 502-CGLP, DIN 51 524-2

LUBEX® CGLP 150

Oil is made from appropriately selected refined mineral base oils and additives. Special friction modifiers provide optimal ratio of static and dynamic friction, which excludes "stick - slip" phenomenon.

Typical use

It is used for lubrication of highly loaded slideways and slide surfaces of machining tools. It is designed for lubrication of vertical slideways of the heaviest machining tools. It can also be used to lubricate gearboxes and other lubrication points, as long as the type and viscosity of the oil correspond to the manufacturer's instructions.

Parameters

Kinematic viscosity at 40°C, mm2/s
150

Flash point, °C
220

Pour point, °C
-18

Specifications / Approvals / Norms
ISO 6743-4 L-HG, L-G, Cincinnati norms, P-53, P-47, P-50, DIN 51 502-CGLP, DIN 51 524-2

LUBEX® CGLP 220

Oil is made from appropriately selected refined mineral base oils and additives. Special friction modifiers provide optimal ratio of static and dynamic friction, which excludes "stick - slip" phenomenon.

Typical use

It is used for lubrication of highly loaded slideways and slide surfaces of machining tools. It is designed for lubrication of vertical slideways of the heaviest machining tools. It can also be used to lubricate gearboxes and other lubrication points, as long as the type and viscosity of the oil correspond to the manufacturer's instructions.

Parameters

Kinematic viscosity at 40°C, mm2/s
220

Flash point, °C
250

Pour point, °C
-18

Specifications / Approvals / Norms
ISO 6743-4 L-HG, L-G, Cincinnati norms, P-53, P-47, P-50, DIN 51 502-CGLP, DIN 51 524-2

Our authorized distributors

on the lubricant market since 2000
On the market since 2000

Development of new lubricants technologies
Development of new technologies

Development of ecological plastic lubricants
Protection of the environment

High quality lubricants
High quality

Cookies Details
This website uses cookies

We use cookies to personalise content and ads, provide social media features and analyse traffic. We also provide information about how you use our website to our social media, advertising and analytics partners. These partners may combine the relevant information with other information that you have provided to them or that they have collected from you when you have used their services.