Dlhá 1, 900 31 Stupava
Kovoobrábacie vodou nemiešateľné chladiaco-mazacie kvapaliny na tvárnenie za studena

Non-water-miscible metalworking fluids (neat metalworking oils) for cold forming

LUBEX® LISOL AL

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for cold steel sheets forming. It is used in pressing, cutting, forming, profiling and similar operations. It is suitable for use in forming sheets of light and non-ferrous metals, especially aluminum.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,8

Density at 20°C, kg/m3
776

Flash point, °C
61

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL AL 210

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for cold steel sheets forming. It is used in pressing, cutting, forming, profiling and similar operations. It is suitable for use in forming sheets of light and non-ferrous metals, especially aluminum.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,6

Density at 20°C, kg/m3
773

Flash point, °C
61

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL EV

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for light and medium demanding cold forming of steel sheets. It is mainly used for pressing varnished steel sheets in the production of steel roof covers, but it can also be used elsewhere in the industry for pressing thin sheets, varnished and galvanized steel components and wherever it is necessary to maintain a high surface cleanliness during machining.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,3

Density at 20°C, kg/m3
765

Flash point, °C
61

Pour point, °C
-25

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL EV-S

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for light and medium demanding cold forming of steel sheets. It is mainly used for pressing varnished steel sheets in the production of steel roof covers, but it can also be used elsewhere in the industry for pressing thin sheets, varnished and galvanized steel components and wherever it is necessary to maintain a high surface cleanliness during machining.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,3

Density at 20°C, kg/m3
762

Flash point, °C
61

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL EV-S01

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for light and medium demanding cold forming of steel sheets. It is mainly used for pressing varnished steel sheets in the production of steel roof covers, but it can also be used elsewhere in the industry for pressing thin sheets, varnished and galvanized steel components and wherever it is necessary to maintain a high surface cleanliness during machining.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,9

Density at 20°C, kg/m3
799

Flash point, °C
70

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL EV-ST05

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for light and medium demanding cold forming of steel sheets. It is mainly used for pressing varnished steel sheets in the production of steel roof covers, but it can also be used elsewhere in the industry for pressing thin sheets, varnished and galvanized steel components and wherever it is necessary to maintain a high surface cleanliness during machining.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,3

Density at 20°C, kg/m3
764

Flash point, °C
62

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL DDO 32

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in operations of precise cutting and cold forming of sheets, it is also effective in operations of milling, grinding and threading. It can also be used for heavy machining as well as for broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
32

Density at 20°C, kg/m3
878

Flash point, °C
180

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4c

LUBEX® LISOL DDO 80

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used for operations of precise cutting and cold forming of sheets and broaching. It is also effective in operations of milling, drilling and threading. It can also be used for heavy machining as well as for horizontally broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
80

Density at 20°C, kg/m3
908

Flash point, °C
200

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4c

LUBEX® CUT PRESS 120

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used for operations of precise cutting and cold forming of sheets and broaching. It is also effective in operations of milling and threading. It can also be used for heavy machining as well as for broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
170

Density at 20°C, kg/m3
990

Flash point, °C
200

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® CUT A 80 DRAW

Active, non-water-miscible fluid for tube drawing based on   optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

It is specially developed for tube drawing. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels. It can also be used for other difficult operations such as broaching, precise cutting, cold forming of sheets, milling and threading.

Parameters

Kinematic viscosity at 40°C, mm2/s
88

Density at 20°C, kg/m3
931

Flash point, °C
230

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4c

Cookies Details
This website uses cookies

We use cookies to personalise content and ads, provide social media features and analyse traffic. We also provide information about how you use our website to our social media, advertising and analytics partners. These partners may combine the relevant information with other information that you have provided to them or that they have collected from you when you have used their services.