Dlhá 1, 900 31 Stupava
Kovoobrábacie vodou nemiešateľné chladiaco-mazacie kvapaliny na tvárnenie za studena

Non-water-miscible metalworking fluids (neat metalworking oils) for cold forming

LUBEX® LISOL DDO 32

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in operations of precise cutting and cold forming of sheets, it is also effective in operations of milling, grinding and threading. It can also be used for heavy machining as well as for broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
32

Density at 20°C, kg/m3
878

Flash point, °C
180

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4c

LUBEX® LISOL DDO 80

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used for operations of precise cutting and cold forming of sheets and broaching. It is also effective in operations of milling, drilling and threading. It can also be used for heavy machining as well as for horizontally broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
80

Density at 20°C, kg/m3
908

Flash point, °C
200

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4c

LUBEX® CUT PRESS 120

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used for operations of precise cutting and cold forming of sheets and broaching. It is also effective in operations of milling and threading. It can also be used for heavy machining as well as for broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
170

Density at 20°C, kg/m3
990

Flash point, °C
200

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® CUT A 80 DRAW

Active, non-water-miscible fluid for tube drawing based on   optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

It is specially developed for tube drawing. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels. It can also be used for other difficult operations such as broaching, precise cutting, cold forming of sheets, milling and threading.

Parameters

Kinematic viscosity at 40°C, mm2/s
88

Density at 20°C, kg/m3
931

Flash point, °C
230

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4c