Dlhá 1, 900 31 Stupava
Kovoobrábacie vodou nemiešateľné chladiaco-mazacie kvapaliny na tvárnenie za studena

Non-water-miscible metalworking fluids (neat metalworking oils) for cold forming

LUBEX® LISOL AL

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for cold steel sheets forming. It is used in pressing, cutting, forming, profiling and similar operations. It is suitable for use in forming sheets of light and non-ferrous metals, especially aluminum.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,8

Density at 20°C, kg/m3
776

Flash point, °C
61

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL AL 210

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for cold steel sheets forming. It is used in pressing, cutting, forming, profiling and similar operations. It is suitable for use in forming sheets of light and non-ferrous metals, especially aluminum.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,6

Density at 20°C, kg/m3
773

Flash point, °C
61

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL EV

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for light and medium demanding cold forming of steel sheets. It is mainly used for pressing varnished steel sheets in the production of steel roof covers, but it can also be used elsewhere in the industry for pressing thin sheets, varnished and galvanized steel components and wherever it is necessary to maintain a high surface cleanliness during machining.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,3

Density at 20°C, kg/m3
765

Flash point, °C
61

Pour point, °C
-25

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL EV-S

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for light and medium demanding cold forming of steel sheets. It is mainly used for pressing varnished steel sheets in the production of steel roof covers, but it can also be used elsewhere in the industry for pressing thin sheets, varnished and galvanized steel components and wherever it is necessary to maintain a high surface cleanliness during machining.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,3

Density at 20°C, kg/m3
762

Flash point, °C
61

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL EV-S01

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for light and medium demanding cold forming of steel sheets. It is mainly used for pressing varnished steel sheets in the production of steel roof covers, but it can also be used elsewhere in the industry for pressing thin sheets, varnished and galvanized steel components and wherever it is necessary to maintain a high surface cleanliness during machining.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,9

Density at 20°C, kg/m3
799

Flash point, °C
70

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® LISOL EV-ST05

Made on the basis of highly refined light petroleum fractions and carefully selected additives. It leaves no traces on the machined material surface.

Typical use

Rapidly evaporating lubricating fluid for light and medium demanding cold forming of steel sheets. It is mainly used for pressing varnished steel sheets in the production of steel roof covers, but it can also be used elsewhere in the industry for pressing thin sheets, varnished and galvanized steel components and wherever it is necessary to maintain a high surface cleanliness during machining.

Parameters

Kinematic viscosity at 40°C, mm2/s
1,3

Density at 20°C, kg/m3
764

Flash point, °C
62

Pour point, °C
< - 60

Copper corrosion - 3 h / 100°C, grade
1a