We offer you an extensive range of automotive and industrial lubricants, cutting oils, compressor oils, heat transfer and forming oils and fuel additives.
In addition to these products, we also have other products available as per your requirements. Contact us.
We offer complete care, advice and also free technical service for the application of our products.
It is produced on the basis of hydrocarbons of IV hazard class with low aromatic content. It can be easily removed with common industrial cleaners and solvents.
Protective anti-corrosion agent designed for the preservation of semi-finished products, pipes, machine parts and fine mechanisms and bearings for storage and transport.
Kinematic viscosity at 40°C, mm2/s
7,9
Density at 20°C, kg/m3
852
Flash point, °C
130
Pour point, °C
-33
Corrosion protection - Condensation chamber, cycles
40
Corrosion protection - Salt fog chamber, h
192
It is produced on the basis of hydrocarbons of III hazard class with low aromatic content. It does not contain barium compounds.
Multifunctional anti-corrosion agent with excellent cleaning and preservative effect. The product has an excellent ability to displace water. It is designed for cleaning and protection of bearings, fine metal parts and equipment, as well as fine mechanisms, where goal is to ensure mobility even at low temperatures.
Kinematic viscosity at 40°C, mm2/s
2,0
Density at 20°C, kg/m3
801
Flash point, °C
61
Pour point, °C
< - 60
It is produced on the basis of hydrocarbons of III hazard class with low aromatic content and carefully selected high quality refined base oils and synergistically acting additives. It does not contain barium compounds.
Multifunctional anti-corrosion agent with excellent cleaning and preservative effect. The product has an excellent ability to displace water. It is designed for cleaning and protection of bearings, fine metal parts and equipment, as well as fine mechanisms, where goal is to ensure mobility even at low temperatures.
Kinematic viscosity at 40°C, mm2/s
2,4
Density at 20°C, kg/m3
804
Flash point, °C
70
Pour point, °C
< - 60
Meets: MIL-C-22235 A
It is produced on the basis of refined base oils, corrosion inhibitors, water-dispersing additives and additives which improve adhesion. Low pour point of oil allows its use at reduced temperature. It has good lubricating properties during forming profiles from ferrous and non-ferrous metals. It has a high effectiveness as an anti-corrosion agent for protecting steel sheets or profiles. The product has excellent water displacing effects.
Universal dual-function preservative-lubricating oil, intended for the protection of ferrous and non-ferrous metal products stored indoor or under a shelter. It is used for protection and lubrication of metal parts and equipment, fine mechanisms, bearings, machine tools and weapons, where goal is to ensure mobility at low temperatures.
Kinematic viscosity at 40°C, mm2/s
75,3
Density at 20°C, kg/m3
907
Flash point, °C
206
Pour point, °C
-18
Corrosion protection - Condensation chamber, cycles
56
Corrosion protection - Salt fog chamber, h
48
Meets: MIL-C-22235 A and MIL-C-372 C
It is produced on the basis of refined base oils, corrosion inhibitors, water-dispersing additives and additives which improve adhesion. Low pour point of oil allows its use at reduced temperature. The product has excellent water displacing effects.
Excellent multifunctional penetrating anti-corrosion agent for long-term anti-corrosion protection with excellent water displacing effect. It is used primarily for lubrication and protection of bearings, metal parts and equipment, fine mechanisms, machine tools and weapons, where goal is to ensure mobility at low temperatures. It can be used for lubrication and protection of joints, knobs, locks and electrical contacts in cars.
Kinematic viscosity at 40°C, mm2/s
18,6
Density at 20°C, kg/m3
897
Flash point, °C
156
Pour point, °C
-42
Corrosion protection - Condensation chamber, cycles
56
Corrosion protection - Salt fog chamber, h
72
Emulsion universal two-function preservative-lubricating oil intended for protection of ferrous and non-ferrous metal products stored indoor. Produced on the basis of a mixture of mineral oil, emulsifiers, corrosion inhibitors, water-dispersing additives and additives which improve adhesion. The concentrate with water forms a stable emulsion, which has good lubricating and anti-corrosion properties.
It is used for protection and lubrication of metal parts and equipment, fine mechanisms and machining tools for protection of internal surfaces of machines. The product is characterized by good washing properties, has excellent water displacing effects, and therefore represents a reliable long-term anti-corrosion protection and anti-corrosion protection between two operations of metal products and equipment.
Kinematic viscosity at 40°C, mm2/s
38
Operating temperature range, °C
20°C až 60°C
Density at 20°C, kg/m3
887
pH value of 5% emulsion in distilled water at 20°C
8,7
Corrosion protection in 20ᵒDh water, grade „0“ (accor. DIN 51 360-T2) at %
3%
Lubocons Chemicals s.r.o. is part of a highly exclusive group of companies in the Slovak Republic which have met the strictest economic evaluation criteria according to the Dun & Bradstreet statistical predictive model. The company’s creditworthiness has the highest AAA rating.
LUBOCONS CHEMICALS s.r.o. has been developing, manufacturing and selling high-performance lubricants and additives since 2000.
We place great emphasis on developing new technologies, especially in the area of producing biodegradable special lubricants.
In addition to our activities, we make great efforts to ensure the protection of the environment and also the safety of the work of our employees.
We are on top of leaders in the formulation and application technology of the production of all types of rapidly biodegradable lubricants.