Dlhá 1, 900 31 Stupava
Production technology for Lubex® universal and special lubricants.

Production and distribution of standard and special lubricants, raw materials for lubricants and fuel additives

We offer you an extensive range of automotive and industrial lubricants, cutting oils, compressor oils, heat transfer and forming oils and fuel additives.
In addition to these products, we also have other products available as per your requirements.
We offer complete care and advice and also free technical service for the application of our products.

Product offer

LUBEX® LISOL DDO 32

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in operations of precise cutting and cold forming of sheets, it is also effective in operations of milling, grinding and threading. It can also be used for heavy machining as well as for broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
32

Density at 20°C, kg/m3
878

Flash point, °C
180

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4c

LUBEX® LISOL DDO 80

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used for operations of precise cutting and cold forming of sheets and broaching. It is also effective in operations of milling, drilling and threading. It can also be used for heavy machining as well as for horizontally broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
80

Density at 20°C, kg/m3
908

Flash point, °C
200

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4c

LUBEX® CUT PRESS 120

Active, non-water-miscible universal fluid based on optimally selected refined base oils and synergistically acting combinations of additives. The viscosity of the oil allows it to be used in broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used for operations of precise cutting and cold forming of sheets and broaching. It is also effective in operations of milling and threading. It can also be used for heavy machining as well as for broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
170

Density at 20°C, kg/m3
990

Flash point, °C
200

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® CUT A 80 DRAW

Active, non-water-miscible fluid for tube drawing based on   optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

It is specially developed for tube drawing. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-machine steels. It can also be used for other difficult operations such as broaching, precise cutting, cold forming of sheets, milling and threading.

Parameters

Kinematic viscosity at 40°C, mm2/s
88

Density at 20°C, kg/m3
931

Flash point, °C
230

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4c

LUBEX® QUENCH 10 MC

High-performance quenching oil with a high flash point and very low viscosity, formulated from specially selected base oils (MC - Molecular Conversion) and with a unique package of additives which provide more intensive quenching and after the cooling process, it leaves the surfaces of hardened materials smooth (if they were smooth before quenching) and without residues of deposits. It does not contain chlorine or PCB.

Typical use

It is used for finishing forgings and semi-finished products. It is also used in the processing of screws, springs and in many other areas. It is especially suitable for quenching components prone to damage. It is mainly used in open systems. Use in closed systems is also possible but with appropriate ratio of surface and weight.

Parameters

Kinematic viscosity at 40°C, mm2/s
11

Density at 15°C, kg/m3
800 - 850

Flash point, °C
180

Corrosion on steel (distilled water), grade
without corrosion

Recommended oil bath temperature, °C
50°C to 80°C

LUBEX® QUENCH 30 MC

High-performance quenching oil, formulated from specially selected base oils (MC - Molecular Conversion) and with a unique package of additives which provide more intensive quenching and after the cooling process, it leaves the surfaces of hardened materials smooth (if they were smooth before quenching) and without residues of deposits. It does not contain chlorine or PCB.

Typical use

It is used for hardening tools for machine tools, demanding transmission parts, various automotive components and many other types of parts. It is especially suitable for quenching components prone to damage. It is used in multi-purpose, open and closed systems.

Parameters

Kinematic viscosity at 40°C, mm2/s
24 - 28

Density at 15°C, kg/m3
810 - 840

Flash point, °C
220

Corrosion on steel (distilled water), grade
without corrosion

Recommended oil bath temperature, °C
50°C to 100°C In closed systems with a protective (inert) atmosphere: 110°C to 130°C

Our authorized distributors

On the market since 2000

Development of new technologies

Protection of the environment

High quality