Dlhá 1, 900 31 Stupava
Production technology for Lubex® universal and special lubricants.

Production and distribution of standard and special lubricants, raw materials for lubricants and fuel additives

We offer you an extensive range of automotive and industrial lubricants, cutting oils, compressor oils, heat transfer and forming oils and fuel additives.
In addition to these products, we also have other products available as per your requirements.
We offer complete care and advice and also free technical service for the application of our products.

Product offer

LUBEX® ECOCUT 22 I

Multi-purpose non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

Recommended for use in systems with one unit (machine) or in central systems as a universal metalworking fluid (coolant). It is used for machining steel, all non-ferrous metals and aluminum alloys. It is most often used in turning, milling, grinding and threading operations. It is also suitable for operations of pressing, forming, profiling of thin sheets, including aluminum alloys and all other non-ferrous metals. It is suitable for use in automatic systems.

Parameters

Kinematic viscosity at 40°C, mm2/s
22

Density at 20°C, kg/m3
850

Flash point, °C
204

Pour point, °C
-24

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® ECOCUT NA 32

Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

Recommended for use in systems with one unit (machine) or in central systems as a universal metalworking fluid (coolant). It is used for machining steel, all non-ferrous metals and aluminum alloys. It is most often used in turning, milling and threading operations. It is suitable for use in automatic systems.

Parameters

Kinematic viscosity at 40°C, mm2/s
32

Density at 20°C, kg/m3
886

Flash point, °C
210

Pour point, °C
-21

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® ECOCUT NA 46

Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

Recommended for use in systems with one unit (machine) or in central systems as a universal metalworking fluid (coolant). It is used for machining steel, all non-ferrous metals and aluminum alloys. It is most often used in turning, milling and threading operations. It is suitable for use in automatic systems.

Parameters

Kinematic viscosity at 40°C, mm2/s
46

Density at 20°C, kg/m3
886

Flash point, °C
210

Pour point, °C
-21

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® CUT A 15 LE

Chlorine-free, non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Contains additives to improve corrosion protection and resistance to aging. High-pressure EP additives and anti-wear additives increase the mechanical and pressure load.

Typical use

Recommended for use in systems with one unit (machine) or in central systems as a high-performance metalworking fluid (coolant) for difficult machining of steel, stainless steels, nickel alloys and other hard-to-process metals. It is most often used in turning, milling, deep drilling operations and is also suitable for threading operations. It is not suitable for processing copper and non-ferrous metals.

Parameters

Kinematic viscosity at 40°C, mm2/s
15

Density at 20°C, kg/m3
850

Flash point, °C
190

Pour point, °C
-27

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® CUT A 36 SPECIAL

Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for various operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, grinding and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
35

Density at 20°C, kg/m3
910

Flash point, °C
196

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® CUT A 68

Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for various operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, drilling and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
68

Density at 20°C, kg/m3
912

Flash point, °C
190

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4b

Our authorized distributors

On the market since 2000

Development of new technologies

Protection of the environment

High quality