Dlhá 1, 900 31 Stupava
Production technology for Lubex® universal and special lubricants.

Production and distribution of standard and special lubricants, raw materials for lubricants and fuel additives

We offer you an extensive range of automotive and industrial lubricants, cutting oils, compressor oils, heat transfer and forming oils and fuel additives.
In addition to these products, we also have other products available as per your requirements.
We offer complete care and advice and also free technical service for the application of our products.

Product offer

LUBOPLEX® CSM 1/2 PM

Water resistant calcium sulfonate complex lubricating grease for applications in paper industry.

Typical use

Typical applications are rolling and plain bearings in the paper industry, especially for the lubrication of industrial bearings operating at high temperatures and high loads in the wet and dry sections of paper machines.

Parameters

Base oil (type)
mineral

Thickener (type)
Calcium sulfonate complex

NLGI
1/2

Base oil kinematic viscosity at 40°C, mm2/s
350-450

Operating temperature range, °C
od -20°C do +160°C

LUBOPLEX® CSM 460 1/2

Multi-purpose lubricating grease made on the basis of a calcium sulfonate complex and mineral oil of high viscosity with excellent oxidation stability and low evaporability.

Typical use

It is suitable for lubrication of bearings in steel mills (continuous casting and rolling), in the paper industry, in the wood processing industry (granulation presses), in mining, cement plants, quarries and in construction equipment. Particularly suitable for continuous lubrication of presses for granulating hardwood pellets in very demanding operating conditions.

Parameters

Base oil (type)
mineral

Thickener (type)
Calcium sulfonate complex

NLGI
1/2

Base oil kinematic viscosity at 40°C, mm2/s
400-800

Operating temperature range, °C
od -20°C do +160°C

LUBOPLEX® CSS 100 1/2

Multi-purpose lubricating grease made on the basis of a calcium sulfonate complex and mainly synthetic base oils. Shows excellent properties for lubrication at low temperatures.

Typical use

It is suitable for lubrication of bearings in the paper industry, in the wood processing industry (granulation presses), in cement plants, quarries and in construction equipment, for belt conveyors and wheeled excavators in surface mines.

Parameters

Base oil (type)
mineral and synthetic

Thickener (type)
Calcium sulfonate complex

NLGI
1/2

Base oil kinematic viscosity at 40°C, mm2/s
90-100

Operating temperature range, °C
od -40°Cdo +160°C

LUBOPLEX® HITEMP CSM MG 2

It contains solid lubricants of the highest quality and purity to improve its properties for the transmission of heavy loads at low sliding speeds. Extends lubrication intervals while reducing frequency of servicing.

Typical use

Suitable for lubrication at high temperatures in brickyards, in the ceramic industry, in the production of concrete and aerated concrete and in cement plants. For wagon (trolley) wheel bearings in tunnel kilns, rotary kilns and coal and rock mills, excavator belts, open spindle gears, racks and gear rims.

Parameters

Base oil (type)
mineral

Thickener (type)
Calcium sulfonate complex

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
350-450

Operating temperature range, °C
od -20°C do +180°C

LUBOPLEX® UNITEMP SYNT CSS 2

Made from calcium sulfonate complex and high class synthetic base oils. Perfectly resistant to washing out with water, has good protection against wear and corrosion, good EP properties and good working stability.

Typical use

Suitable for use in wet environments with permanent penetration of moisture and water, and in a flowing water environment at low to medium speed bearings operating in adverse and difficult application conditions. Recommended for lubrication of electric motors, pumps, conveyors, agitators, gearboxes (gears), presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, end rods and steering joints as well as for lubrication of machines used in the paper industry.

Parameters

Base oil (type)
synthetic

Thickener (type)
Calcium sulfonate complex

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
400-440

Operating temperature range, °C
od -40°C do +180°C

LUBEX® HITEMP 180 PUM 2

High temperature lubricating grease with excellent EP properties and wear resistance. The combination of a special viscous base oil, organic thickener and selected additives allows this product to achieve a very high application life.

Typical use

Recommended for lubrication (with very long lubrication intervals) of all high temperature plain and roller bearings in industrial applications such as: mining, construction, chemical industry, paper industry, agriculture, forestry, cement production, lime production, aerated concrete production and in electric power plants. It is used in production for asphalt processing in road construction.

Parameters

Base oil (type)
mineral

Thickener (type)
Organic

NLGI
2

Base oil kinematic viscosity at 40°C, mm2/s
460-490

Operating temperature range, °C
od -20°C do +180°C

Our authorized distributors

On the market since 2000

Development of new technologies

Protection of the environment

High quality