Dlhá 1, 900 31 Stupava
Kovoobrábacie vodou nemiešateľné chladiaco-mazacie kvapaliny

Non-water-miscible metalworking fluids (neat metalworking oils)

LUBEX® ECOCUT A 18 LE

Chlorine-free non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for vertical drawing and deep drilling cutting operations, because it washes well and forms an adhesive film.

Typical use

Recommended for use in systems with one unit (machine) or in central systems as a high-performance metalworking fluid (coolant) for for drawing tools and tools for deep drilling and milling. It is used in machining steel, stainless steels, nickel alloys and other difficult-to-machine metals. It is most often used in vertical broaching operations, but it is also effective in vertical threading.

Parameters

Kinematic viscosity at 40°C, mm2/s
18

Density at 20°C, kg/m3
860

Flash point, °C
190

Pour point, °C
-21

Copper corrosion - 3 h / 100°C, grade
4c

LUBEX® CUT A 68 SPECIAL

Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets, for drawing, milling, drilling and threading operations. It can also be used for horizontal broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
68

Density at 20°C, kg/m3
912

Flash point, °C
190

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® CUT A 68 SPECIAL-M

Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets, for drawing, milling, drilling and threading operations. It can also be used for horizontal broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels. It can also be used as an additive to mineral cutting oils to improve lubricity properties in a concentration of 3-25%.

Parameters

Kinematic viscosity at 40°C, mm2/s
68

Density at 20°C, kg/m3
932

Flash point, °C
188

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4a

LUBEX® CUT A 80 SPECIAL

Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for broaching operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets, for drawing, milling, drilling and threading operations. It can also be used for horizontal broaching operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
77,2

Density at 20°C, kg/m3
916

Flash point, °C
198

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® ECOCUT HSF 4981

Chlorine-free, non-emulsion oil with inactive sulfur based on optimally selected refined and hydrogenated base oils and synergistically acting combinations of additives.

Typical use

It is used for machining all types of steels under difficult cutting conditions and high temperatures by honing and superfinishing. It is especially suitable for one-unit machines or for central lubrication systems, regardless of the type of filter used. It can be used for machining procedures of all elements of rolling bearings, while achieves the prescribed tolerances.

Parameters

Kinematic viscosity at 40°C, mm2/s
4,5

Density at 20°C, kg/m3
820

Flash point, °C
130

Pour point, °C
-33

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® ECOCUT HSF 5

Chlorine-free, non-emulsion oil without sulfur content, based on optimally selected refined and hydrogenated base oils and synergistically acting combinations of additives that improves oxidative stability, anti-corrosion and lubricating properties.

Typical use

It is mainly used for lapping and honing steel and alloys materials. It is especially suitable for one-unit machines or for central lubrication systems, regardless of the type of filter used. It can be used for machining procedures of all elements of rolling bearings, while achieves the prescribed tolerances. It is also used in others operations, such as grinding of inner and outer surfaces, high-speed grinding from non-ferrous metals to high-speed steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
5,5

Density at 20°C, kg/m3
826

Flash point, °C
146

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
1a