Dlhá 1, 900 31 Stupava
Kovoobrábacie vodou nemiešateľné chladiaco-mazacie kvapaliny

Non-water-miscible metalworking fluids (neat metalworking oils)

LUBEX® CUT A 36 SPECIAL

Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for various operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, grinding and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
35

Density at 20°C, kg/m3
910

Flash point, °C
196

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® CUT A 68

Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for various operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, drilling and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
68

Density at 20°C, kg/m3
912

Flash point, °C
190

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® CUT A 68-M

Non-emulsion oil with active sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. Due to its viscosity, the oil is suitable for various operations, because it washes well and forms an adhesive film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, drilling and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels. It can also be used as an additive to mineral cutting oils to improve lubricity properties in a concentration of 3-25%.

Parameters

Kinematic viscosity at 40°C, mm2/s
68

Density at 20°C, kg/m3
932

Flash point, °C
188

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
4a

LUBEX® CUT A 80

Neemulzný olej s aktívnou sírou na báze optimálne vybraných selektívne rafinovaných základových olejov a synergicky pôsobiacich kombinácií prísad. Viskozita oleja umožňuje jeho použitie v rôznych procesoch, pričom dobre umýva a tvorí priľnavý film.

Typical use

It is mainly used in precision cutting and cold forming operations of metal sheets and is also effective in milling, drilling and threading operations. It is suitable for machining steel, stainless steels, nickel alloys and other hard-to-process steels.

Parameters

Kinematic viscosity at 40°C, mm2/s
80

Density at 20°C, kg/m3
916

Flash point, °C
198

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
4b

LUBEX® ECOCUT HSF 10 ZTS

High-speed grinding, chlorine-free non-emulsion oil with inactive sulfur based on synthetic oils with synergistically acting combinations of additives. It contains additives to improve corrosion protection and aging resistance, EP additives and anti-wear additives that increase mechanical and pressure loads.

Typical use

It is used in all grinding operations, such as grinding of inner and outer surfaces, high-speed grinding, slow grinding, grinding of gears from non-ferrous metals to high-speed steels. It is also suitable for general machining and deep drilling of ferrous metals. It is especially suitable for one-unit machines or for central lubrication systems, regardless of the type of filter used.

Parameters

Kinematic viscosity at 40°C, mm2/s
12,5

Density at 20°C, kg/m3
838

Flash point, °C
164

Pour point, °C
-45

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® ECOCUT HSF 10981

High-speed grinding, chlorine-free non-emulsion oil with inactive sulfur based on optimally selected refined and hydrogenated base oils and synergistically acting combinations of additives. It contains additives to improve corrosion protection and aging resistance, EP additives and anti-wear additives that increase mechanical and pressure loads.

Typical use

It is used in all grinding operations, such as grinding of inner and outer surfaces, high-speed grinding, slow grinding, grinding of gears from non-ferrous metals to high-speed steels. It is also suitable for general machining and deep drilling of ferrous metals. It is especially suitable for one-unit machines or for central lubrication systems, regardless of the type of filter used.

Parameters

Kinematic viscosity at 40°C, mm2/s
12,5

Density at 20°C, kg/m3
858

Flash point, °C
150

Pour point, °C
-54

Copper corrosion - 3 h / 100°C, grade
1a