Dlhá 1, 900 31 Stupava
Kovoobrábacie vodou nemiešateľné chladiaco-mazacie kvapaliny

Non-water-miscible metalworking fluids (neat metalworking oils)

LUBEX® CUT 22

Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

Recommended for a wide range of machining: turning, milling, threading, drilling. It is used for machining steel, non-ferrous metals and light metals. It is suitable for automatic and multi-spindle lathes as cutting oil and also as hydraulic oil.

Parameters

Kinematic viscosity at 40°C, mm2/s
22

Density at 20°C, kg/m3
848

Flash point, °C
180

Pour point, °C
-27

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® CUT 32

Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

Recommended for a wide range of machining: turning, milling, threading, drilling. It is used for machining steel, non-ferrous metals and light metals. It is suitable for automatic and multi-spindle lathes as cutting oil and also as hydraulic oil.

Parameters

Kinematic viscosity at 40°C, mm2/s
32

Density at 20°C, kg/m3
868

Flash point, °C
190

Pour point, °C
-24

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® CUT 15 ECO AM

Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. It is characterized by excellent lubricating, anti-abrasion, anti-corrosion, anti-oxidant and EP properties.

Typical use

It is used in machining steel and aluminum alloys as well as all non-ferrous metals. It is most often used in turning, milling, grinding and threading operations. It is also suitable for operations of pressing, forming, profiling of thin sheets, including aluminum alloys and all other non-ferrous metals. It is suitable for use in automatic systems.

Parameters

Kinematic viscosity at 40°C, mm2/s
15

Density at 20°C, kg/m3
848

Flash point, °C
198

Pour point, °C
-24

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® CUT 22 ECO AM

Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. It is characterized by excellent lubricating, anti-abrasion, anti-corrosion, anti-oxidant and EP properties.

Typical use

Used for machining all non-ferrous metals, alloy and non-alloy aluminum sheets, aluminum alloys and steel. It is most often used in turning, milling, grinding, cutting and threading operations. It is suitable for use in multi-spindle automatic lathes machines. It can also be used for drawing and pressing operations of thin aluminum sheets.

Parameters

Kinematic viscosity at 40°C, mm2/s
22

Density at 20°C, kg/m3
850

Flash point, °C
210

Pour point, °C
-18

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® CUT 32 ECO AM

Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives. It is characterized by excellent lubricating, anti-abrasion, anti-corrosion, anti-oxidant and EP properties.

Typical use

Used for machining all non-ferrous metals, alloy and non-alloy aluminum sheets, aluminum alloys and steel. It is most often used in turning, milling, grinding, cutting and threading operations. It is suitable for use in multi-spindle automatic lathes machines. It can also be used for drawing and pressing operations of thin aluminum sheets.

Parameters

Kinematic viscosity at 40°C, mm2/s
32

Density at 20°C, kg/m3
859

Flash point, °C
218

Pour point, °C
-15

Copper corrosion - 3 h / 100°C, grade
1a

LUBEX® ECOCUT NA 10

Multi-purpose low-fog non-emulsion oil with inactive sulfur based on optimally selected refined base oils and synergistically acting combinations of additives.

Typical use

Recommended for use in systems with one unit (machine) or in central systems as a universal metalworking fluid (coolant). It is used for machining steel, all non-ferrous metals and aluminum alloys. It is most often used in turning, milling and threading operations. It is suitable for use in automatic systems.

Parameters

Kinematic viscosity at 40°C, mm2/s
10,5

Density at 20°C, kg/m3
817

Flash point, °C
196

Pour point, °C
-60

Copper corrosion - 3 h / 100°C, grade
1a