Oil for low temperatures, which is mixture of naphtenic mineral oils and special additives.
It is used for lubricating ammonia refrigeration compressors. It is not miscible with CFC (freon) refrigerants. It can also be used as a bearings (machine) oils, if good fluidity at low temperature is required, in the appropriate viscosity class according to ISO VG. It can also be used as a lubricating oil to lubricate some delicate mechanisms exposed to low temperatures.
Kinematic viscosity at 40°C, mm2/s
32
Density at 15°C, kg/m3
898
Flash point, °C
174
Pour point, °C
-33
Specifications / Approvals / Norms
DIN 51503 KA, DIN 51503 KC, ISO 6743 / 3
Oil for low temperatures, which is mixture of naphtenic mineral oils and special additives.
It is used for lubricating ammonia refrigeration compressors. It is not miscible with CFC (freon) refrigerants. It can also be used as a bearings (machine) oils, if good fluidity at low temperature is required, in the appropriate viscosity class according to ISO VG. It can also be used as a lubricating oils to lubricate some delicate mechanisms exposed to low temperatures.
Kinematic viscosity at 40°C, mm2/s
68
Density at 15°C, kg/m3
904
Flash point, °C
188
Pour point, °C
-30
Specifications / Approvals / Norms
DIN 51503 KA, DIN 51503 KC, ISO 6743 / 3
This oil is mixture of appropriately selected refined mineral oils with high viscosity index, capable of providing high performance for indirect heat transfer in technological apparatus in closed systems.
Oil for indirect heat transfer in closed systems up to temperatures of max. 230°C. Maximum contact temperature with heater (film temperature) is 260°C. An inert environment (nitrogen overpressure) must be permanently maintained in heating system. It meet the requirements of DIN 51 522.
Kinematic viscosity at 40°C, mm2/s
32
Flash point, °C
190
Pour point, °C
-20
Operating temperature range, °C
- 15°C do +230°C
Viscosity index
90
This oil is mixture of appropriately selected refined mineral oils with high viscosity index, capable of providing high performance for indirect heat transfer in technological apparatus in closed systems.
Oil for indirect heat transfer in closed systems up to temperatures of max. 230°C. Maximum contact temperature with heater (film temperature) is 260°C. An inert environment (nitrogen overpressure) must be permanently maintained in heating system. It meet the requirements of DIN 51 522.
Kinematic viscosity at 40°C, mm2/s
46
Flash point, °C
220
Pour point, °C
-15
Operating temperature range, °C
- 10°C do +230°C
Viscosity index
90
This oil is mixture of appropriately selected refined mineral oils with high viscosity index, capable of providing high performance for indirect heat transfer in technological apparatus in closed systems.
Oil for indirect heat transfer in closed systems with forced circulation up to temperatures of max. 290°C. Maximum contact temperature with heater (film temperature) is 320°C. An inert environment (nitrogen overpressure) must be permanently maintained in heating system. It meet the requirements of DIN 51 522.
Kinematic viscosity at 40°C, mm2/s
32
Flash point, °C
190
Pour point, °C
-21
Operating temperature range, °C
- 15°C do +290°C
Viscosity index
90
This oil is mixture of appropriately selected refined mineral oils with high viscosity index, capable of providing high performance for indirect heat transfer in technological apparatus in closed systems.
Oil for indirect heat transfer in closed systems with forced circulation up to temperatures of max. 290°C. Maximum contact temperature with heater (film temperature) is 320°C. An inert environment (nitrogen overpressure) must be permanently maintained in heating system. It meet the requirements of DIN 51 522.
Kinematic viscosity at 40°C, mm2/s
46
Flash point, °C
220
Pour point, °C
-18
Operating temperature range, °C
- 15°C do +290°C
Viscosity index
90
This oil is mixture of appropriately selected refined mineral oils with high viscosity index, capable of providing high performance for indirect heat transfer in technological apparatus in closed systems.
Oil for indirect heat transfer in closed systems with forced circulation up to temperatures of max. 310°C. Maximum contact temperature with heater (film temperature) is 340°C. An inert environment (nitrogen overpressure) must be permanently maintained in heating system. It meet the requirements of DIN 51 522.
Kinematic viscosity at 40°C, mm2/s
35
Flash point, °C
190
Pour point, °C
-21
Operating temperature range, °C
- 15°C do +310°C
Viscosity index
100
This oil is mixture of appropriately selected refined mineral oils with high viscosity index, capable of providing high performance for indirect heat transfer in technological apparatus in closed systems.
Oil for indirect heat transfer in closed systems with forced circulation up to temperatures of max. 310°C. Maximum contact temperature with heater (film temperature) is 340°C. An inert environment (nitrogen overpressure) must be permanently maintained in heating system. It meet the requirements of DIN 51 522.
Kinematic viscosity at 40°C, mm2/s
46
Flash point, °C
220
Pour point, °C
-18
Operating temperature range, °C
- 15°C do +310°C
Viscosity index
100
Mold oil for concrete molds, made from refined mineral oils, corrosion inhibitors and additives, which acts on the contact surface of mold and concrete.
Universal release agent for separation of formworks and molds, suitable for non-porous non-absorbent formworks and molds made from wood, metal and plastic in the production of panels and concrete elements. It is mainly used for lubricating molds in the production of precasts hardened in steam chambers and precast concrete.
Kinematic viscosity at 40°C, mm2/s
7
Density at 20°C, kg/m3
840
Flash point, °C
101
Pour point, °C
-24
Operating temperature range, °C
- 15°C do +80°C
Mold oil for concrete molds, made from refined mineral oils, corrosion inhibitors and additives, which acts on the contact surface of mold and concrete.
Universal release agent for separation of formworks and molds, suitable for non-porous non-absorbent formworks and molds made from wood, metal and plastic in the production of panels and concrete elements. It is mainly used for lubricating molds in the production of precasts hardened in steam chambers and precast concrete.
Kinematic viscosity at 40°C, mm2/s
10,3
Density at 20°C, kg/m3
844
Flash point, °C
105
Pour point, °C
-27
Operating temperature range, °C
- 15°C do +80°C